Main Image

Surface Deburring for Hand-Held Tools

  • The tips of the fine alumina fiber rods have superior grinding force.
  • Can greatly improve surface finish in a short time.
  • Less clogging due to the self sharpening action of the fiber rod tips.
  • Can be used in dry or wet applications.
  • Consistent rigidity results uniform and fine finish


  • EDM scale removal from molds.
  • Modifying molds.
  • Deburring after forming of precision parts.
  • Deburring after machining of precision parts.
  • Surface finishing
    (removing post-processing marks and scales)
  • Removing tool marks after end milling.
  • Used in CNC machining applications for small areas or
    to follow cutting tool paths to remove tool marks.


  • Polishing Flat Surfaces
    Attach to a hand tool and apply brush to work surface at
    approximately a 45ยบ angle. Apply as constant a load as
    possible and keep the depth of cut to a minimum (under 1mm).
  • Truing/Dressing
    Press the tip of the rotating brush against abrasive paper mounted onto a board to adjust the form of the brush.
  • Dry/Wet Applications
    The brush can be used for both dry and wet applications.
  • Polishing Edges & Deburring Uneven Areas
    When polishing edges and deburring uneven areas, work with lower revolutions and a lighter load. DO NOT apply
    excessive pressure on the edges with the sides of the fiber rods.
  • Bristle Length
    With usage over time, the overall length of the fine alumina fiber rods (bristle length) will shorten, resulting in more grinding power but less flexibility. Adjust the grinding action and flexibility by decreasing the load (depth of cut).