Main Image

Wheel Brush

Application
  • Recommended operating parameters 8,000 - 10,000 RPM (12,000 Max) at 12 to 15 inches per minute.

Processing Conditions

  • The best approach is to place a center of a brush at the center angle to the edge, figure 1. Burrs on A-side and B-side can both be removed. Edge quality becomes stable if a brush is rotated in both clockwise and counter-clockwise directions. Brush position on figure 2 is effective for burrs on A-side in the same way as figure 3 for burrs on B-side.
  • The process conditions may differ depending on burrs. Make adjustments according to the quality of the work piece.
  • If burrs remain, increase the number of passes
  • To extend tool life, increase the feed per bundle

 

Applicable Work Pieces