The Xebec Difference

Xebec Product Characteristics and Features

More than a brush - performs like a cutting tool.

Xebec's cutting fiber is the world's only brush made by continuous ceramic fiber. This unique material allows for high performance grinding power, consistent performance and superior surface finish. The fibers are formed into bristles for brushes or bound into stones. Self-sharpening tips lead to superior grinding performance. End-to-end solid abrasive rod material assures consistent performance.

Unlike brass wire, steel wire and abrasive impregnated nylon brush filaments, the unique design of the XEBEC fiber rod allows it to maintain its shape with no deformation even after repeated use. This leads to consistent performance time after time. Achieve a beautiful, finely finished surface without tool marks or residues.

The XEBEC ceramic fiber has 3 features that enable CNC deburring & polishing:

Unsurpassed Grinding Power
Consistent Cutting Performance
No Deformation

Strength 1: Unsurpassed Grinding Power

Our uniquely developed ceramic fibers themselves are the abrasives and its fiber content ratio is over 80%. Cutting edges that are made up from the tip of each fiber bristle create overwhelming grinding power.

XEBEC Brush™ has 60 times higher grinding power compared with nylon brushes and steadily removes burrs.

Grinding Power Graph
Strength 2: Consistent Grinding Power to the End

Due to the structure of XEBEC ceramic fiber, new cutting edges are always exposed. The brush maintains consistent cutting performance to the end, enabling CNC deburring and polishing

Grinding Power Consistency Graph
Strength 3: No Deformation

XEBEC Brush™ maintains its straight shape and does not spread out like a toothbrush even after repeated use. Thus, it is ideal for CNC deburring and polishing in mass production line.

Grinding Power Graph
Amazing Polishing Power

XEBEC Brush™ is made of ceramic fiber bristle which was developed for mold polishing. Its high grinding power improves surface roughness in a short time.
Best achievable surface roughness Ra=0.1μm (Rz = 0.4μ)

Polishing Power Graph

Features of Xebec Back Burr Cutter

A helical cutting tool and customized tool path data for guaranteed burr-free performance.

The Back Burr Cutter

Micro-grain cemented carbide: Sharp and long lasting
Highly heat-resistant AlTiCrN coating: Support materials from non-ferrous (e.g. aluminum) to difficult-to-cut materials (e.g. titanium and inconel)
Helical Blade: Cleaner cutting edge and prevent secondary burrs
Uniform Edge Shape by Consistent Deburring Amount
Faster Operating Time Thanks to the Unique Cutter Design
Long Tool Life by Using the Entirety of the Cutting Blade
The contact points of the spherical cutting edge is continuously shifting. The red part shows the range of the blade use.

Applicable Areas

Applicable Areas

For a variety of edge shapes

One cutter size supports various edge profiles in different sizes and shapes.

Applicable Areas

Xebec™ Path Xebec™ Back Burr Cutter

Optimal path is programmed by Xebec
Consistent deburring amounts result in a uniform edge shape
Faster operating time thanks to the unique cutter design
Entirety of the cutting blade is used providing a longer tool life

Xebec™ Path - All Edges, Now Available!

A turn-key deburring solution. Customized tool path data for complex edge profiles using Xebec® Back Burr Cutter & Custom Path with guaranteed burr-free performance.

Back Burr Cutter & Path

Safety Warning

Cutting fiber brushes and stones are cutting tools and are often rotated at high speeds with a power tool or in a machine tool. They should never be operated at higher than the maximum speeds listed. When using these tools, safety glasses and gloves should be worn. Breathing the dust created by using these products for prolonged periods of time should be avoided.

ISA